易通閘

LINK GATE

主辦方承租場地舉辦展會或快閃活動時,常發現進場緩慢?需加派人力驗票?或需要靈活的動線安排?
場地管理方則面臨固定設備難以適應需求?額外施工破壞空間?為了特殊入口安排,重複採購功能相似卻不通用的設備?
傳統閘門需破壞地面施工(如開挖、埋管、穿線),這些為長期固定而生的作法,無法滿足臨時的靈活安排,對承租雙方都造成困擾。
為解決上述痛點,我們設計了「LINK GATE 易通閘」。 這款專為短期活動設計的輕量化、模組化閘門,核心理念為「免施工、全無線」。它完全靠電池供電,並配備雙電池系統,確保尖峰時刻無縫供電,換電不停擺。
為追求簡單直覺,現場安裝非常俐落。設備推至定位後只需四步驟:
1. 將機身上方折疊螢幕立起到合適角度。
2. 依照場地需求,利用後側扣環結合現場紅龍來規劃動線。
3. 打開電源開關。
4. 若需臨時減少通道,拉出機身左側內建的隱藏紅龍與鄰近機器連接即可。
短短幾分鐘內,驗票通道便能迅速搭建完成。LINK GATE 讓主辦方能像玩積木般彈性增減通道,大幅降低佈展時間與成本,將人力釋放至其他工作;同時也為場地方提供靈活的解決方案與潛在的租金收入。

LINK GATE

When hosting large events, do you face slow entries, require extra staff, or lack flexible layouts?
As a venue manager, does fixed equipment fail to meet your needs? Does additional construction damage the venue?

Traditional wired gates require complex excavation. Built for permanent use, they fail to meet temporary needs, causing headaches for everyone.

To solve this, we designed "LINK GATE", a lightweight, modular gate for short-term events. Completely wireless, it is powered by a dual-battery system, ensuring non-stop operation during peak hours.

Setup takes four steps:
1. Flip up the screen.
2. Connect rear attachment rings to venue ropes.
3. Turn on the power.
4. Pull the built-in rope to adjust or close lanes.

Lanes are ready in minutes. LINK GATE scales like modular building blocks, saving time and freeing up staff, while offering venues a flexible solution and rental income.

作品編號 #906 作品名稱 易通閘 作品分類 立體造型暨產品設計類工業設計組 學校科系 國立高雄師範大學 工業設計學系 設計師 臧O彥
高雄師範大學 工業設計學系
(四年級)

邱O利
高雄師範大學 工業設計學系
(四年級)

羅O濬
高雄師範大學 工業設計學系
(四年級)
指導老師 林O裕
載入中…
關閉中…